SHC Firmware Download

SHC Firmware v1.07.1

Bug Fixes
  • Fixed the errors of c-torque value that occurred if non-fastened after setting, at the time when you monitor.
PC Software

Version1.07.1
Size403.34 KB
Downloaded20 times
Create Updated2015-12-28
Please login

SHC Firmware v1.07.0

Feature Updates
  • The digits of value transmitted under a specific condition during PLC monitoring was fixed. (P 304=1, P319=1, MOR Command)
  • Also, the Min/Max angle value of the value that is monitored can be brought.
PC Software

Version1.07.0
Size403.34 KB
Downloaded5 times
Create Updated2015-12-21
Please login

SHC Firmware v1.06.5

Feature Updates
  • Added the function to check when the motor cable is opened.
PC Software

Version1.06.5
Size395.04 KB
Downloaded9 times
Create Updated2015-11-03
Please login

SHC Firmware v1.06.0

Feature Updates
  • Problem found : Symptom that user are unable to receive a fastening completion signal has occurred in specific conditions of they.
  • The function to change the completion output time from 160ms to 500ms was added in P317. (Currently, completion output time : 160ms)
PC Software

Version1.06.0
Size394.77 KB
Downloaded9 times
Create Updated2015-09-10
Please login

SHC Firmware v1.05.8

Bug Fixes
  • Fixed the symptom that converted torque values don't be reflected when you adjust the torque compensation from the controller.
PC Software

Version1.05.8
Size394.70 KB
Downloaded5 times
Create Updated2015-03-13
Please login

SHC Firmware v1.05.2

Feature Updates
  • P300 3 times added.
  • FND screen display - accept requests of wireless division / torque+condition display
    1.20 rdy_run_OK_E301(NG error code display)
PC Software

Version1.05.2
Size392.79 KB
Downloaded5 times
Create Updated2014-05-20
Please login

SHC Firmware v1.04.0

Feature Updates
  • P229 added : Advanced function / Reverse angle --> Angle after torque up (changed)
  • setting range : 0~5,000 degree
  • P229 : forward / reverse seletion
  • E114 added : overload before target angle
Bug Fixes
  • bug sloved when P316 added : converted torque limit setting default value is "0" (setting unit 0 ~ 10%) E108
PC Software

Version1.04.0
Size391.19 KB
Downloaded4 times
Create Updated2014-02-18
Please login

SHC Firmware v1.03.6

Feature Updates
  • add Parameter P316
  • add error setting for converted torque P316
PC Software

Version1.03.6
Size390.95 KB
Downloaded2 times
Create Updated2014-02-10
Please login

SHC Firmware v1.03.3c

Feature Updates
  • The output port malfunction caused by controller. The compiler bug. need checking the output signal when factory released.
  • The program unchanged
PC Software

Version
Size390.03 KB
Downloaded3 times
Create Updated2013-12-06
Please login

SHC Firmware v1.03.3

Bug fixes
  • bug solved : A1 value is not often displayed.
PC Software

Version1.03.3
Size390.03 KB
Downloaded2 times
Create Updated2013-12-06
Please login