SDC Firmware v1.05.9

Feature Updates Default Factory setting change - P40 : 100 -> 50 (for SD120,200,300 only) - P72 : 180 -> 0 - P74 : 0 -> 10 ( Auto error reset time 1Sec ) Bug Fixes Bug solved - E118 (during low speed after seating point in manual screwdriver)

By |December 3rd, 2012|Tags: , , , , , |0 Comments

SDC Firmware v1.05.7

Feature Updates model added - SD200M, 300M, 1500M (Manual type) PC Software

By |November 14th, 2012|Tags: , , , , , |0 Comments

SDC Firmware v1.05.6

Feature Updates  Smart Manager- Fastening OK is added on Realtime monitoring PC Software

By |November 6th, 2012|Tags: , , , , , |0 Comments

SDC Firmware v1.05.5

Feature Updates parameter added - P89 (Stop after Seating point-E333) Added - Socket tray Smart Manager- all torque curve is displayed in multi fastening. PC Software

By |November 6th, 2012|Tags: , , , , , |0 Comments

SDC Firmware v1.05.0

Feature Updates Model added - SD120M, SD600M (Manual type) PC Software h6>

By |October 17th, 2012|Tags: , , , , , |0 Comments

SDC Firmware v1.03.8

Feature Updates Not Used PC Software

By |June 8th, 2012|Tags: , , , , , |0 Comments

SDC Firmware v1.03.7

Feature Updates On the realtime torque curve monitoring, the torque curve made deep trop suddenly in some application. With this issue, the tightening was not completed. PC Software

By |May 31st, 2012|Tags: , , , , , |0 Comments

SDC Firmware v1.03.3

Feature Updates Correction-motor rotation related problem  -  replace R & C value on the PCB SDA200 offset value change to +3% Bug Fixes Bug correction - I/O singal ON before controller power ON made wrong operation PC Software

By |April 6th, 2012|Tags: , , , , , |0 Comments

SDC Firmware v1.03.0

Feature Updates model added - SDA200 parameter added -P88 (Auto speed change ON/OFF) - Offset type with Z (SD200Z) - SDA200-Seagate, SD200Z-LG Mobile PC Software

By |March 27th, 2012|Tags: , , , , , |0 Comments

SDC Firmware v1.02.8

Feature Updates E118 added-no speed error model added - SD120 PC Software

By |March 8th, 2012|Tags: , , , , , |0 Comments