Feature Updates parmeter P98 added : Start signal OFF delay time  Requested by Doga. Customer lost the fastening OK output when operator release start lever just before torque up, but clutch was activated by innertia. range : 0 - 1,000 mS  factory setting : 10mS Motor immediate stop by breaking when start signal OFF PC Software

Feature Updates Automatic parmater reset to factory setting feature deleted when the driver model is replaced. Manual paremeter reset is required when the driver is replaced with the different model of driver. P59 : Factory setting is changed from "0" (USB) to "1" (RS232C) when initialized PC Software

Feature Updates Torque range modification of HD081 2.5 - 8.0Kgf.cm --> 2.5 - 8.3Kgf.cm by request of Doga PC Software

Feature Updates Bit socket tray - selectable socket no. on P50 PC Software

Feature Updates P88 : Soft/Hard joint select feature removed. P88 : Driver Lock (I/O) feature in direction - 0 : Both direction - 1 : Reverse direction Lock only - 2 : Forward direction Lock only PC Software

Feature Updates  by Jabil request ( Only for V2J version ) - V2 has same torque formula with V1 in FW - New torque spec of HD060V2J: 1.9~4.2 lbf.in PC Software

Feature Updates New torque formula for V2J version in Jabil. EZ-Torq II with Sehan RDA, Asian filter setting PC Software

Feature Update Fastening data output / model no. output instead of preset # ( requested by Torq-on for Denso monitoring program ) PC Software

Feature Updates Max turn value was excluded in range -> changed it to be included in OK range. PC Software

Feature Updates Every event on Multi-sequence will be displayed on realtime monitoring Bug Fixes torque setting in ozf.in on Hi-manager PC Software