HDC Firmware v2.60.2

Feature Updates parmeter P98 added : Start signal OFF delay time  Requested by Doga. Customer lost the fastening OK output when operator release start lever just before torque up, but clutch was activated by innertia. range : 0 - 1,000 mS  factory setting : 10mS Motor immediate stop by breaking when start signal OFF PC Software

By |November 13th, 2014|Tags: , , , , , |0 Comments

HDC Firmware v2.60.0b

Feature Updates Automatic parmater reset to factory setting feature deleted when the driver model is replaced. Manual paremeter reset is required when the driver is replaced with the different model of driver. P59 : Factory setting is changed from "0" (USB) to "1" (RS232C) when initialized PC Software

By |October 13th, 2014|Tags: , , , , , |0 Comments

HDC Firmware v2.58.2

Feature Updates Torque range modification of HD081 2.5 - 8.0Kgf.cm --> 2.5 - 8.3Kgf.cm by request of Doga PC Software

By |July 7th, 2014|Tags: , , , , , |0 Comments

HDC Firmware v2.58.0

Feature Updates Bit socket tray - selectable socket no. on P50 PC Software

By |May 30th, 2014|Tags: , , , , , |0 Comments

HDC Firmware v2.56.2

Feature Updates P88 : Soft/Hard joint select feature removed. P88 : Driver Lock (I/O) feature in direction - 0 : Both direction - 1 : Reverse direction Lock only - 2 : Forward direction Lock only PC Software

By |February 7th, 2014|Tags: , , , , , |0 Comments

HDC Firmware v2.56.0

Feature Updates  by Jabil request ( Only for V2J version ) - V2 has same torque formula with V1 in FW - New torque spec of HD060V2J: 1.9~4.2 lbf.in PC Software

By |December 19th, 2013|Tags: , , , , , |0 Comments

HDC Firmware v2.55.1

Feature Updates New torque formula for V2J version in Jabil. EZ-Torq II with Sehan RDA, Asian filter setting PC Software

By |October 8th, 2013|Tags: , , , , , |0 Comments

HDC Firmware v2.54

Feature Update Fastening data output / model no. output instead of preset # ( requested by Torq-on for Denso monitoring program ) PC Software

By |May 15th, 2013|Tags: , , , , , |0 Comments

HDC Firmware v2.54

Feature Updates Max turn value was excluded in range -> changed it to be included in OK range. PC Software

By |April 2nd, 2013|Tags: , , , , , |0 Comments

HDC Firmware v2.42

Feature Updates Every event on Multi-sequence will be displayed on realtime monitoring Bug Fixes torque setting in ozf.in on Hi-manager PC Software

By |April 6th, 2011|Tags: , , , , , |0 Comments